Window Guards
No. 40 Channel Frame
No. 50 Round Frame

No. 40 ROD FRAME WINDOW GUARDS
  • Window Guards are also made with channel framing, for inside or outside installation.
  • Standard specification is 1 1/2" diamond mesh, No. 10 W & M gauge wire, clinched into 1" x 12" x 18" channel frame.
  • No. 40- A stationary guards have holes in framing to provide for fastening with screws or bolts.
  • No. 40-B or 40-C hinged guards are made with channel hinge bar, or with angle hinge and strike bars with hinges on one side and hasp on opposite side for padlocking.  Can be made to lock either on outside or inside.
  • Guards 5 ft. high and over are made with double channel horizontal stiffeners riveted through mesh and with ends welded to frame.
channel frame window guards
Stationary
No. 40 - A   STATIONARY
Locking Inside
No. 40 - B   LOCKING INSIDE
Locking Outside
No. 40 - C  LOCKING OUTSIDE

No. 50 ROUND FRAME WINDOW GUARDS
 
 

  • Guards for prevention of glass breakage or easy entry are usually made of 1 1/2" diamond mesh, No. 10 W & M gauge wire, clinched to 3/8" round rod frame.
  • The round rod frame is generally used for outside installation as the round rod does not hold rain or moisture.
  • No. 50- A stationary guards are furnished with hinge clips on frame to provide for fastening with screws or bolts.  Clips can be turned to allow fastening on inside or outside of opening.
  • No. 50-B or 50-C hinged guards are provided with hinge clips on one side and hinge hasp for padlock on the other side, arranged to lock outside or inside.  Can be made with 3-point locking bar on large guards.
channel frame window guards
Locking Inside
Locking Outside
Central Wire and Iron
2101 DeWolf Street
Des Moines, Iowa 50316-2710
Phone: 515-244-2532
Fax: 515-244-3004
TOLL FREE 800-397-0041
info@CentralWireandIron.com

Partitions / Window Guards / Standard Doors & Locks / About Us / Home